.585″ valve lift. IOG = gear drive cams with Inner & Outer drive Gears. Complete kit with installation hardware, bearings and gasket. Designed as bolt-in cams for 103 CID engines with stock 9.7:1 compression ratio up to 10.5:1. Works well with stock, un-ported heads, but is great for S&S CNC ported heads. More power across the rpm range best results form 2500-5500 rpm. The gear drive system is in fact a revolutionary different and much more reliable construction. Especially in high lift/performance applications, when compared with the OEM chain-drive design. A gear driven camshaft is stronger and will not give any of the mechanical problems connected with the OEM chain driven camshafts. The S&S gear drive kit will increase valve timing accuracy, and therefore horsepower, by eliminating the timing chain lash and loosely fit stock cam gears. The only downside of gear drive is that you may experience a slight increase in mechanical sound, this is why OEM is using a chain. It has no other mechanical advantages whatsoever. Since the chain guides and tensioner are eliminated there is no longer the possibility for these parts to fail and damage other engine parts. The S&S gear drive kit reverses the direction of rotation of the rear cam, providing additional operating clearance between cam lobes. As a result, higher cam lifts are possible with the S&S gear driven cams. Note: With the exception of the 475G and 510G cam, adjustable pushrods (like MCS 503573) are required to compensate for the smaller camshaft base circle of these cams. Note: Material may have to be removed from the inner surface of the OEM gear cover before installation of the S&S outer drive gears. Note: The required S&S installation kit (503566) for gear drive cams is included in this complete (IOG) kit. Note: Using .625″, .635″, .640″ and .675″ lift cams will require crankcase clearancing. Note: OEM beehive valve springs of 04-17 Dyna; 04-17 Softail and 04-16 Touring models will acommodate valve lifts up to 590″ valve lift and, 160 lb. of valve seat force, up to 6200RPM. Running higher than 6200 RPM or lifts greater than 590″ will require performance valve springs.
Storlek
Recensioner
Det finns inga recensioner än.
Endast inloggade kunder som har köpt denna produkt får lämna en recension.
23 759,00 krDet ursprungliga priset var: 23 759,00 kr.20 191,00 krDet nuvarande priset är: 20 191,00 kr.
Varukorg
Sekretessöversikt
Den här webbsidan använder kakor (cookies) för att du skall få den bästa upplevelsen. Kakor är små textfiler som sparas av webbläsaren och används för att känna igen dig om du återkommer till vår sida och för att hjälpa oss att se vilka sidor och områden på webbsidorna som vi kan behöva förbättra, eller vilka sidor som är mest intressanta.
Denna kaka måste alltid vara på, den sparar nödvändiga inställningar för att webbsidan skall fungera samt till exempel din inställning om du väljer att INTE få några andra kakor från oss, så att du slipper svara på frågan nästa gång.
Om du väljer bort denna kaka så kommer vi inte att kunna spara dina valda inställningar för kakor. Det betyder att att varje gång du besöker oss så kommer du att få frågan om du vill acceptera eller avvisa kakor på nytt.
Tredje parts cookies
Vi använder Google Analytics för att spara anonym information om våra besökare. Det är till exempel hur mång besök vi får, vilka sidor eller utbildningar som är mest populära. Att ha den här kakan påslagen hjälper oss i vårt arbete med att förbätttra webben till en bättre och mer lättnavigerad plats.
Vänligen slå på ”nödvändiga kakor” först så att vi kan spara dina inställningar.
Recensioner
Det finns inga recensioner än.